The invention and improvement of machine of sanitary napkin is of great significance for industrial manufacturing. In the development of equipment electrical, it is also an important development direction to reduce the occurrence of faults and deal with faults efficiently. There are some deficiencies in the actual operation, hardware maintenance and system program early warning of the existing machine electrical. The following describes in detail the electrical maintenance steps of the sanitary napkins making machine.
1. Check the working environment of the machine of sanitary napkin
After the machine of sanitary napkin breaks down, it is necessary to stop work and check it in time to prevent greater faults or even accidents. For the common abnormal electrical operation of the machine, data collection and analysis should be carried out for the working environment after power failure. In the actual machine operation, the production efficiency will be reduced and the product quality will be affected due to the rise of the temperature and the change of the working voltage. Experienced operators can also be willing to make a definite prediction of the fault according to their product performance. Generally speaking, the damage caused by the fault caused by environmental change and condition change is small. After the environment is debugged, the normal working state can be gradually restored.
2. Electrical hardware inspection of machine of sanitary napkin
Due to aging, damage and other reasons, the electrical equipment of the machine of sanitary napkin cannot support the continuous production in terms of hardware, so it is necessary to check the hardware after power failure. Generally speaking, the hardware inspection of machine electrical is complex. Due to the large number of components and complex lines, it is necessary to make full preparations for step-by-step inspection when troubleshooting the hardware, and separate the hardware from large to small and from coarse to fine. The damaged parts shall be carefully analyzed to understand the causes of damage, so as to adjust the system and reduce the occurrence rate of next failure. For the hardware inspection of the machine, corresponding plans shall be made to ensure that regular inspection and maintenance can be carried out, and aging and damaged parts can be replaced and maintained in time.
3. Software warning of machine of sanitary napkin
The high degree of automation and intelligence of machine of sanitary napkin is mainly reflected in the success of software programming. A relatively perfect production system has important requirements for software. The fault tolerance rate of software is of great significance to the smoothness and efficiency of production. When programming the production process, it is necessary to give early warning of software errors, so that the software alarm can be given in time when the failure occurs, so that the programmer can timely understand the point of failure and correct it.
Therefore, the electrical maintenance of machine to make sanitary pads should also be highly valued by the staff. If it is not adjusted in time, it is very easy to cause production accidents. At the same time, it is also necessary to gradually strengthen the electrical software settings of the machine, strengthen the safety to a certain extent, improve the reliability of software early warning, reduce software failures, and improve the efficient operation of the whole machine.
