Pampers making machine The installation project is to combine a series of equipment into a set of equipment or a production line, thus forming a technical equipment system, and finally forming a production capacity. pampers making equipment. The installation accuracy includes the positional accuracy between each independent equipment required to ensure the correct linkage of the entire set of devices during the installation process, the equipment manufacturing accuracy that can be reproduced by a single device through reasonable installation technology and adjustment methods, and the entire set (set) The accuracy of the equipment in three aspects such as the running accuracy of the operation.
1.Pampers making machine Preparations before installation
Before pampers making machine is in place, the concrete strength of the equipment foundation shall be measured. Generally, the equipment can be installed in place only when the concrete strength reaches more than 60%. Small and medium-sized equipment can use the steel ball impact method. Before the large and medium-sized equipment is installed, the foundation must be preloaded. The weight of the preload is 1.2 to 1.5 times the sum of its own weight and the maximum weight of the allowable workpiece. Until the foundation settlement cannot be observed with the level. The main contents are whether the basic dimensions, center line, elevation, bolt hole coordinates, depth, etc. meet the design and construction requirements. There are unqualified places in the basic inspection process to be dealt with, and it is usually a strategy for dealing with basic defects.
2.Pampers making machine Main points of maintenance
(1) Strictly implement the current pampers making machine maintenance system, do regular maintenance work, and ensure that the mechanical equipment is always in the best working condition. If the utilization rate of some mechanical equipment is high or the failure rate is high, the follow-up inspection method can be selected. When abnormal operation is found, it needs to be shut down in time, and professional maintenance personnel conduct detailed inspection and take effective maintenance methods to deal with it. In daily work, the current status of mechanical lubrication should be checked regularly during the operation of mechanical equipment. If there is any problem, lubricating oil should be added immediately to avoid mechanical failure due to lubrication problems.
(2) In the process of maintaining machinery, we should not only pay attention to major problems and ignore small problems, but do a good job in various maintenance work to avoid mechanical operation with diseases, minimize the loss of mechanical performance, and prevent serious impact on the progress of the project. At the same time, in the process of mechanical construction, equal attention should be paid to maintenance, regular inspections should be carried out according to the degree of wear and tear of mechanical equipment components, and prevention and maintenance work should be done to prevent serious waste of resources and costs caused by forced maintenance. It is required to apply advanced maintenance to daily mechanical maintenance, so that engineering repair vehicles can be reasonably configured, and machinery can be maintained in time, thereby achieving the purpose of reducing maintenance costs, shortening time and extending the service life of mechanical equipment.
(3) In order to maximize the utilization rate of machinery and equipment, the establishment and improvement of the machinery management system should be carried out. At the same time, the machinery management system and management structure should be improved, and a reasonable reward and punishment system must be established, so as to improve Only with the awareness of safe operation of machinery operators and a stronger sense of responsibility can they better care for the equipment, reduce human error in operation, avoid serious mechanical wear and tear, and prevent casualties and property losses.
To sum up, it is required to use the pampers making machine equipment reasonably and do various maintenance and repair work in a timely manner. Only in this way can the rapid development of production be promoted. In the process of installation and maintenance of mechanical equipment, it is required that the staff must improve their technical level of installation and maintenance, and carry out quality control throughout the entire operation process. While standardizing the installation process of machinery and equipment, it is necessary to increase the maintenance and control efforts. Only in this way can the quality of the project be ensured and the rapid development of the enterprise be promoted.
