Infant diaper making machine is widely used in manufacturing enterprises. Automatic production lines save a lot of time and cost. In cities with developed industries, the maintenance of baby diapers making machine has become a hot spot. The maintenance of automatic production line is mainly completed by operators and maintenance workers. Well, let's analyze it for you and have a look.
1. Routine maintenance of infant diaper making machine
(1) The mechanical circuit, air circuit, oil circuit and transmission parts shall be checked and cleaned every day;
(2) Patrol inspection shall be carried out during the working process, and sampling inspection shall be carried out for key parts of the infant diaper making machine;
(3) Any abnormal situation shall be recorded in time, minor problems shall be handled in time every day, major problems shall be prepared for spare parts, and the whole line shall be shut down for maintenance.
(4) Make a plan for vulnerable parts, and replace vulnerable parts in advance to prevent unburned parts.
2. Maintenance method of infant diaper making machine
(1) Synchronous repair method: during production, if a fault is found, try not to repair it, and take the maintenance method to continue the production of the infant diaper making machine. On the rest day, the maintenance workers and operators will be concentrated to repair all problems at the same time. In this way, the non-standard production line equipment can normally produce the whole line in the next working time.
(2) Partial repair method: if the production line has major problems and the repair time is long. Synchronous repair method cannot be used. At this time, the rest day is used to concentrate the maintenance workers and operators to repair a certain part. The other part shall be repaired on the next rest day. Ensure that the production line does not stop production during working hours.
In addition, the method of pre repair shall be adopted in the management of the nappy making machine. Install a timer in the equipment, record the working time of the equipment, use the wear law to predict the wear of vulnerable parts, and replace vulnerable parts in advance, so as to solve the fault before it occurs, so as to ensure the full load production of non-standard automatic production line.
3. Maintenance of infant diaper making machine
The circuit, air circuit, oil circuit and mechanical transmission parts (such as guide rail) of the infant diaper making machine shall be checked and sorted out before and after the shift; Patrol inspection shall be conducted during the operation process, spot check shall be conducted for key parts, records shall be made in case of any abnormality, small problems shall be handled before and after the shift (the time is not long), and accessories shall be prepared for major problems; The whole line shall be shut down for repair, the scheme for vulnerable parts shall be made, and the vulnerable parts shall be replaced in advance to prevent the unburned.
Only by doing a good job in the routine maintenance of the infant diaper making machine can we produce high-quality products faster and better.
